Reference number: DAT-Beamreducer
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.
Need more info?
Contact our expert.
Martin
Labus
Sales Engineer
+49 8153 405-17
m.labus@laser2000.de
Need more info?
Contact our expert.
Eugenie
Strasser
Sales Engineer
+49 8153 405-53
e.strasser@laser20000.de
Description
The most frequently sold systems UCD12and UCD23 has a shorter side of the chip (5 or 7 mm).
It follows from this - always assuming a Gaussian distribution of the beam profile - a maximum measurable beam diameter of 2 to 3 mm.
The TaperCam has 20 mm x 15 mm aperture, the possibility beam diameter up to max. To measure 8 mm.
Using a Afokals the beam diameter is reduced, so that a maximum beam diameter of up to 45 mm can be measured.
The following types of stand available:
| Productcode | Reduction ratio | max. Apertur |
| DAT-BE-2x-X | 2x | 13 mm |
| DAT-BE-5x-X | 5x | 20 mm |
| DAT-BE-10x-X | 10x | 30 mm |
| DAT-BE-15x-X | 15x | 45 mm |
Please select the appropriate coating of the wavelength range:
| Productcode | Wavelength range (nm) |
| DAT-BE-xy-A | 350 ... 650 |
| DAT-BE-xy-B | 650 ... 1050 |
| DAT-BE-xy-C | 1050 ... 1620 |
The current software can be downloaded for free from the manufacturer's website.
The complete documentation for beam profile analysis of DataRay click here.
Downloads
Those products may also interest you
This optical beam reducer to be connected to the C-mount a camera WinCamD-ray analysis is used when the beam diameter of the laser is much greater than the sensor chip or of the taper.